GPR Underground Utility Scanning

Orbital Africa has been in fore-front providing most stable and reliable geospatial consultancy services; including GPR underground utility scanning and survey services that meet clients' needs at minimal cost.

GPR UNDERGROUND UTILITY SCANNING & SURVEY IN AFRICA


GPR Underground Utility Scanning and Survey Services in AfricaGPR Technology has recently been a go-to technology when it comes to location of underground utilities. Our team use the latest technology with expert methods to explore detectable utility features underground. We combine the knowledge with expertise in using the latest technology, including Ground Penetrating Radar (GPR) equipment. This non-destructive method uses electromagnetic radiation in the microwave band (UHF/VHF frequencies) of the radio spectrum, and detects the reflected signals from subsurface structures e.g. pipes, cables etc. By adopting this advanced underground survey technology incorporating the Ground Penetrating Radar and Electro-Magnetic Locators (EML), we analyse reflected signals from structures, services, buried objects and layers beneath the ground. With statutory record plans, visual inspections of all lifted service cover on site – we often create an accurate plan of the subsurface environment in multiple formats including 3D. A Utility Survey will provide the client with the confidence to progress with the project and ensure there are ‘no surprises’. Adhering to all health and safety regulations thus ensuring that GPR Survey best practices are employed.

Why GPR Underground Utility Scanning?

GPR Underground Utility Scanning and Survey Services in AfricaGPR, unlike more traditional EMLs, can pick up both metallic and non-metallic objects as well as utilities in a completely non-intrusive way. This unique feature makes the use of GPR for utility surveys almost mandatory in this project since there is increasing use of plastic piping on utilities. As well, GPR has more uses than just mapping utilities, with the right equipment and expertise it can be used for the following; pavement/bridge/roadway inspection, void detection, concrete slab analysis, rebar mapping, verifying as-built information of concrete walls and floors. Using GPR prevents damage by accurately locating all buried pipes and cables prior to excavation. Ground penetrating radar can be used as part of the utility locating workflow providing more complete locates & reduce risk. View GPR photos >>> 1 2 3 4

How GPR Underground Utility Scanning Works

The Ground Penetrating Radar (GPR) equipment works by transmitting an Electro-magnetic or radio wave pulse into the ground at various frequencies, which are recorded on site using mobile device/tablet installed with GPR software. The GPR also has GNSS receiver integrated with the system. The signal is transmitted and then reflected back to the GPR unit, the quality of the signal in both directions can be dependent on the properties of the material it passes through. The GNSS captures the coordinates of the underground scan hence it’s possible to produce a georeferenced map from the analysed data. This is advantageous since it helps in determining the correct location of underground utilities on site. The recorded sections of scanned data are post-processed in the office using GPR office software. GPR Underground Utility Scanning and Survey Services in AfricaConsequently, each scan is assessed and analysed for any possible targets (services, anomalies and voids). These are then selected using a specialist software and our highly trained GPR Surveyor. The output from this software is integrated into the utility survey model and presented in a concise and easy to understand way such as a GIS Map or model. The underground utility surveys combine GPR, EML, visual inspection and records to produce the best subsurface mapping information possible without digging! To help complement this further, we employ a vacuum excavation service. This often enables our team to expose the utilities to provide an accurate visual data & information regarding their type, depth below the surface & location.

GPR Underground Scanning and Survey Workflow

  1. Locate and Mark:
    (a) Real-time, in Field Locates - Simply walk the system back and forth over an area, and buried targets will appear as hyperbolas under the surface. Just backup until the red line aligns with the center of the hyperbola. This is the location of the buried pipe or the cable.
    (b) Locate and Mark Traditionally “Non-Locatables” - GPR can locate both metallic and non-metallic pipes and cables. This will provide a complete picture of the underground, and helps to ensure that nothing was missed using traditional locate methods.

  2. In-Field Visualization:
    (a) MapView - When using an external GPS, you can add flags and field interpretations on targets in the GPR data and quickly visualize them using MapView. This bird’s eye view helps to differentiate point targets from utilities and helps to correlate the GPR results with site drawings.
    (b) Grid Scan - Using a grid scan of a complex area, you can visualize linear utilities at varying depths. This helps to provide an understanding of the subsurface while still on site.
    (c) Visualize Complex Sites - Using a grid scan of a complex area, you can visualize linear utilities at varying depths. Even closely spaced utilities can be detected as individual lines. This example shows eight buried pipes in a relatively small area.
    (d) Map abandoned Utilities - GPR can map abandoned, non-locatable utilities that may not be detected with traditional methods. In this example, the utility shown on the bottom was capped and could not be located using traditional pipe and cable locators. A grid scan was collected over the area; the depth slices identifying the abandoned, capped utility.

  3. Subsurface Utility Mapping (SUM) and Subsurface Utility Engineering (SUE):
    The GPR maps buried infrastructure and results can be incorporated in CAD and GIS drawings to help plan for large infrastructure projects.
    GPR Underground Utility Scanning and Survey Services in Africa (a) Map Multiple utilities at different depths and made of different materials. Since GPR can locate all utilities, including metallic and non-metallic pipes, a complete picture of all buried utilities at a project site can be completed early in the project planning. This example shows a cast iron pipe and a PVC pipe at different depths in the middle of a busy intersection. This aided in future utility planning.
    (b) Locate utilities to plan new installations. Using GPS and interpretations, GPR can be integrated into Quality Level B SUE investigations. In this example, closely spaced utilities existed, and city planners wanted to ensure that the route of the new water lines did not interfere with existing infrastructure. The use of GPR helped them to plan the installation with minimal disruptions.

  4. Create Stunning Maps and Reports:
    GPR data is saved and available for post-survey analysis and reporting, providing accurate records for future reference & comprehensive deliverables for your customers.
    (a) Georeferenced Maps and Data - Easily plot images of your data path, screen shots and interpretations in Google Earth. All information is exported seamlessly for viewing in Google Earth and other GIS platforms.
    (b) Create Utility Maps in Google Earth - Plotting interpretations on GIS or aerial images and connecting them to show the utility path is a powerful way to portray your locate results.
    (c) Quickly Produce Summary Reports - Take your locates to the next level by providing reports of your findings. Reports can be generated instantly with the EKKO_Project software, included with your GPR system.

Also view here >>> Orbital's GPR Undergroung Utility Scanning and Survey Procedures

Features Detected by GPR Underground Scanner

GPR Underground Utility Scanning and Survey Services in Africa
  1. Metallic & non-metallic pipes (PVC, Asbestos cement, Concrete storm and sewer systems);
  2. Utilities with broken or damaged tracer wires;
  3. Underground storage tanks;
  4. Drainage tiles;
  5. Non-utility structures (Vaults, Foundation walls)

GPR complements traditional Electromagnetic (EM) Technology by:

  1. Delineating utilities in close proximity;
  2. Providing reliable depth estimates;
  3. Allowing for data visualization to better map the subsurface;
  4. Reporting and archiving results for future reference;
  5. Integrating data with third-party software (eg. Google Earth).



You can also request a quote for GPR Underground Utility Scanning and Survey services by sending us an e-mail at: geo@orbital.co.ke or by calling us on: +254-719-672296.